100 Pcs 50cm Low Temperature Fusible Flux Cored Aluminum Electrode Without Solder Powder Welding Wire 1.6/2mm Aluminum Welding Rod (Size : 1.6MM-300PCS)

Usage.Clean and polish the physical surface.Heat the surface of the metal material until the temperature of the wire reaches the working temperature of 380°C to 400°C. 3.3. When repairing thin aluminum, heat the aluminum metal to the proper working temperature, then rub and melt it with a welding wire to form a weld.4.Weld small objects with propane gas, heat and weld large objects with industrial gas or induction heating devices, and cool naturally after welding.Caution.1. The thicker the piece, the more difficult it is to heat it up, so it is important to use a proper heat source.2. As long as the surface temperature of the base material to reach the working temperature of the wire, you can start welding.When using acetylene welding, a neutral flame should be used, but do not burn the wire directly.4. Applicable heat source: such as propane, oxyacetylene, etc.5.Storage: please store in a dry and ventilated place.Caution.1) The surface of base metal must be clean.The temperature of the base material should reach 400 degrees, including the welding process, the temperature of the base material should be maintained at 400 ℃, the temperature can be high or low.

• Length: 500mm / 19.7", Diameter: 2mm / 0.08", 1.6mm / 0.06".
• High quality: Made of aluminum, non-toxic, odorless and durable.
• No Flux Powder: No need to use other flux powders from aluminum alloys as a flux core, and the coating is salt-based.
• -Versatile: Suitable for welding or overlaying of alloys with high strength, malleability and good corrosion resistance.
• Packing List: 20 *Aluminum Wire/10 *Aluminum Wire/30 *Aluminum Wire/50 *Aluminum Wire